The 5 Best MTB & Road Bike Mudguards of 2020

 

The set of mudguards will help the riders to fund off the worst of this mess and this will also prevent the riders from getting sprayed. Though mountain bikers are probably not adverse in getting covered in mud, a mudguard on a mountain bike serves the important function of stopping mud from flying into the face of the riders. No rider will want an eye full of mud or a blob of dirt on their glasses.

Most MTBs also use a small front mudguard in a dry condition as they do a great job of catching dust and small debris that gets kicked up by the tire and this might otherwise end up in their faces. We have listed some of the best MTB and road bike mudguards here along with their buying guide. We hope this helps our readers in choosing the best MTB mudguard.

Best MTB & Road Bike Mudguards



Quick Answer: The 5 Best MTB & Road Bike Mudguards – [2020]

  1. SKS-Germany X-Blade Fender
  2. RaceFace Mud Crutch
  3. SKS S-Board Front Road Bicycle Fender
  4. Planet Bike Cascadia ALX Bike Fenders
  5. Yopoon Front Bicycle Fender Mudguard

Best MTB & Road Bike Mudguards Reviews


#1. SKS-Germany X-Blade Fender

 

SKS-Germany X-Blade Fender At a Glance:
  • Dual component dirt board
  • Attaches easily with all seat post
  • Offers perfect height adjustment
  • Weight: 239 grams
  • Makes use of 2 joint technology
  • Quick-release mounting
  • Adjusts to the wheel of the bike
The SKS Germany X Blade fender is a high-quality two-component dartboard for the rear wheel of mountain and trekking bikes. Irrespective of the type of bike that one rider, they have the best-fit X-blade for them in the range.

Owing to its quick-release mounting, the dart board can fit almost any seat post and it optimally adjusts to the wheel of the bike as well with the help of two joint technologies.

The rear mount fenders work great with a dropper seat post. The strap does not allow for adjustability and thus, it should mount either to the narrow or the far part of the dropper, depending on how much sit sticks out of the frame.

It is very easy to take on and off by just flipping the lever. The attachment of the fender is one-inch-high, the user has to raise the seat a little bit so as to enhance the fit and compatibility.

#2. RaceFace Mud Crutch

 

RaceFace Mud Crutch At a Glance:
  • Dimensions: 9 x 5 x 1 inches
  • Weight:2.4 ounces
  • Durable Mylar laced woven elastic
  • Throws off the mud as the fork compresses
  • Quick on and off design
  • RF moniker rubber logo
  • Mud crutch stretches around the fork
This is one of the best mudguards for Mountain terrain bikes and is of Myla laced woven elastic. Its mud crutch stretches around the fork to collect any mud spray that heads upwards on the biker.

The mud crutch seamlessly wraps around the fork arch and securely fastens with the help of Velcro around the crown. It is easy to fix and does not require any professional indulgence. The crutch performs a perfect job in deflecting chunks of ice, snow, and gunk away from the biker.

The piece of Velcro that one uses to secure the material around the fork arch will detach during high-speed rough sections of the trail. This can be fixed with the use of two bobby pins, that helps in keeping things locked down. For those planning to run the crutch as a front fender solution, it will be of help to catch most of the trail debris up the front tire.

#3. SKS S-Board Front Road Bicycle Fender

 

SKS S-Board Front Road Bicycle Fender At a Glance:
  • Dimensions: 9 x 2.5 x 13.9 inches
  • Weight: 4.2 ounces
  • Adjusting mount that adapts to most fork angles
  • Quick-release fitting system that fits aero forks
  • Maximum tire width is 38 mm
  • It is designed to use with 700C wheels
  • Approximate weight is 98 grams
The SKS S board front road bicycle fender features a smart clip-on front mudguard for road, cyclocross, gravel bikes, hybrid, etc. The maximum width of the tire can be 38 mm.

The fender is the ideal companion to the S blade rear mudguard. The double hinged quick release fitting system also helps in fitting the aero forks. Paintwork protection film for the frame is included with the fender.

It features an adjusting mount that adapts to most of the fork angles. Its quick-release fitting system also fits the aero forks. The fender is ideal for 700C wheels and for all-terrain riding.

The maximum diameter of its straps is about 3/8 inches long. This strap helps the mudguard to mount on forks and it is wide enough to stay 100% effective.

#4. Planet Bike Cascadia ALX Bike Fenders

 

Planet Bike Cascadia ALX Bike Fenders At a Glance:
  • Offers the best protection from rain, snow, and sleet
  • Tough, elegant and simple at the same time
  • Renders full-wrap coverage
  • Available in 9 different sizes
  • Aluminum construction
  • Stainless hardware
  • Release tabs at the front
  • Luscious mudflap
This MTB road bike mudguard helps in making the cycling part of one’s life better. It helps anybody to take up cycling as part of their daily routine. Irrespective of the weather, the fender gets the bikers covered from the sleet, rain, and snow.

These are expert aluminum beauties that are elegant, tough and simple at all times. Whether riding around the town or touring cross country the bikers can rely on these fenders to enhances years of full wrap bike coverage. They are available in 9 different sizes so that the bikers a find a perfect fit.

The fender is of aluminum construction and features 6061 aluminum blades. Its stainless hardware and V stays are pre-installed and are also compatible with disc brake. The fender features release tabs on the front fender for additional safety. There is also a 100 mm luscious mud flap for additional coverage.

#5. Yopoon Front Bicycle Fender Mudguard

 

Yopoon Front Bicycle Fender Mudguard At a Glance:
  • Fender with a folding design
  • Enhances fender coverage
  • Protects the biker from mud and water
  • Mounts to the rigid fork crown
  • Low stanchion arch
  • Sturdy, durable and lightweight
  • Easy to install
  • Quick-release flaps
This fender features a compact and lightweight design for wet weather cycling. It features a simple and lightweight design for excellent protection both for the user and their suspension components. It is also available in a variety of colors to suit any bike.

The fender protects the front of the bike while adding style and class so as to customize one’s ride. Its wide application helps in handling any weather and keeps away elements while keeping the custom appearance.

The front of the mudguard has the best design to offer the best protection without spoiling the look of the mudguard. Its wider over with flat rear end offers maximum protection and frame clearance that compares with a simple symmetrical curve. The mudguard helps the commuters to cycle in wet weather and for a more comfortable experience.

Different Types of MTB Mud Flaps and Mudguards

Mudgurd

Before discussing the different types of mudguards and mud flaps available for road bikes, we need to ascertain the importance of investing in a good MTB Mudguard. A great Mudguard is essential as it offers a high degree of protection to both the user and the vehicle. Fixing this unit to the bike helps in reducing the service trips and cleaning trips of its internal parts. It also prevents the bike from taking in any dust, debris, unwanted moisture that the tires may throw on the way, while one drives on a range of terrains. Having the right MTB mudguard is the best way to ensure that the bike stays in top shape at all times.

Broadly there are two types of mudguards, namely, plug-in mudguards and fixed mudguards. The plug guards install pretty quickly and can be removed when required. These are for occasional riders and sporty drivers who bother much on the appearance of the fender. Fenders that fix up vibrate less and protect the driver with its length and tight fit, better than plug-in fenders.

  • MTB Mudguards
  • Road bike Mudguards
  • Fixed mudguards

MTB Mudguards:

These are small guards, that is best for mountain bikes. They feature full and short mudguards, and this model allows the fender to accommodate wide tires. Before any debris, mud, and dust gets thrown into the face of the riders and these small plastic fenders attach themselves to the arch and fork legs to protect the fork seals and to catch all the dust.

Road Bike Mudguards:

These fenders are available in two major types, namely clip-on and fixed. They are of plastic, aluminum or carbon for durability and sturdiness. The clip-on mudguards are an excellent option if the frame doesn’t possess any eyelets.

Fixed Mudguards:

A number of bicycles have fenders that are too short to render optimal protection. For fixed mudguards, the ends of the plate should extend down the rear wheel, to the height of the rear wheel axle, so that it doesn’t wet the rider. If necessary, it is possible to extend the sheet with a rubber or a leather splash guard.

 

Points To Consider Before Investing in an MTB Mudguard

Mudguard

Mostly, cyclists have no idea how to choose the right mudguard for their bikes and eventually, they end up spending a lot of money on the wrong model. But possessing some knowledge about mudguards in the vital factors helps in buying the best mudguard for cycling enthusiasts. Some of these features are as follows,

  • Fender type
  • Rear or front fender
  • Compatibility
  • Material
  • Installation

Fender Type:

It is important to choose the best fender according to the type of bike that one chooses. There are a number of fender models that accommodate all types of bikes. The type of construction used in developing a fender can help in distinguishing if it works for the bike or not. The construction method of the frame can help in knowing the type of terrain that the bike can roll on, the extent of damage that it can withstand, etc.

Rear or Front Fender:

Some bikers and cyclists will want to keep the rear of the bike safe, while others love to hold fenders on both the front and the back of the bike. Depending on one’s preference, one can opt for bumpers that come as a set if one wishes to protect both the front and rear areas of the MTB. For those wanting to protect the rear, be sure to choose a fender model that best suits for fitting the bike seat post. It also prevents jamming and also offers sufficient clearance with little resistance.

Compatibility:

Yet another feature while selecting the ideal bike fender is to consider if it will work for the bike size. The compatibility of the mudguard with the MTB is crucial since these units come in different sizes. These are given on the packaging on the fender to enlighten customers when they make a purchase. It is important to study the bike, know the size and find a bumper that corresponds directly with it for a perfect fit and performance. The size of the fender is not restricted with its width and it also includes the length. It is important to keep an eye for extending frames as they are effective in protecting the bikes from moisture and debris.

Material:

Mudguards are always very durable entities. But before making a purchase, it is important to learn its durability and confirm by examining the materials that make up the fender. Plastics such as polypropene, polycarbonate and polyurethane are robust and sturdy and are able to retain their shape and form even after years of regular use. The construction material should be tough and lightweight and should be flexible as well so that they can install at ease.

Installation:

This is one of the most important factors that every cyclist needs to consider in order to ease of installation of the mudguard. The fender that one chooses needs to be easy to install and doesn’t require any special skills or professional help. Most models in the market these days are elementary in design and are easy to install, owing to the clip-on system. Some models come with an instruction manual that is straightforward enough to follow and implement. Users should opt for a unit that will suit their needs and their level of protection.

 

MTB and Road Bike Mudguards FAQs

Is it easy to fix a mudguard on the bike?

Fixing mudguards on the road bikes can take little time for it to fit well around the brakes. It deserves a lot of patience and once they are set up, they help in keeping the biker dry and clean all through the wet months of the year.

What features should an MTB mudguard possess?

A full set of commuter mudguards should render the best wheel coverage as possible. This also helps in minimizing the water and debris, that will otherwise get flung towards the user. Commuter mudguards come in plastic and metal variants, some mudguards also have mud flaps for extra coverage or reflectors to help enhance the visibility.

What types of the mudguard is best for road bikes?

Mudguards for road bikes are of two types. There are fixed and permanent guards that demand threaded bosses to attach with the bike. There are also occasional guards that one can quickly attach prior to a ride. Permanent road bike mudguards offer the best protection from road spray.

What are the benefits of fork guards on an MTB?

Fork guards are good as they render minimal addition to the bike when mud and water spray off the front of the wheel. The guards catch it before it flung on to the ace of the rider.  Small fenders that are of neoprene strap on to the suspension fork between the lower leg brace and the crown.

 

Buyer’s guide – Look for these before buying mudguards

  • Clearance and eyelets
  • Length and style of the mudguard
  • Brakes

Clearance and Eyelets:

Check for the eyelets of the bike. See if the bike is built into the frame where a full bolt-on mudguards can fit. Check for clearance between the frame and the wheel to accommodate the guard. It is also a good idea to look for clip-on guards. Though it is possible to fit full guards to bikes without points by making use of P-clips.

Length and Style of The Mudguard:

Depending on what sort of mudguard that the bike can take, it is also good to consider the length of the fender that the bike should wear. Full guards are generally longer and protect the rider, the bike and also anyone drafting in the rider’s slipstream from road muck and wheel-spray. Shorter mudguards, singe guards and beavertail style are options that render less protection but are aesthetically pleasing.

Brakes:

Full mudguards feature a bracket that attaches at the brake bridge and fork crown. It is good to check that these options are available if the bike has disc brakes. Depending on where the brakes mount, it is also good to get creative with the stays and to bend them to fit around the calipers.

 

Final Words

Most riders wonder why mudguards are required for their bikes, we hope we have given the best justification on why one should choose an MTB and road bike mudguards. We also hope that our guide on the best mudguards helps our readers in choosing the best mudguards for all road bikes and MTBs.

 

Leave a Reply