Any mountain biker would admit the fact that the best thing they like about mountain biking is riding downhill rather than riding up. The resultant adrenaline pumping, fast corners, and gravity assisted speed all doubles up for a fun experience that the rider gets while riding downhill.
The real adrenaline-pumping doesn’t happen while cranking up the hill. While the bikes enjoy the making descending fun while riding downhill on a specific bike, they may not enjoy the same riding experience while riding the bike back to the top again.
Majority of the cross country bikes are for speed going up and down the hill but are not built to deal with huge hits, drops and jumps that makes the entire mountain riding fun. These are the reasons why the majority of the bikers choose the endure bikes.
They have become the most popular genre in mountain biking. We have listed the top five of the best enduro mountain bikes along with the guide so that our readers know what exactly to look for in a mountain bike before purchasing it.
Best Enduro Mountain Bikes
Quick Answer: The 5 Best Enduro Mountain Bikes – 
- Merax Falcon Full Suspension Mountain Bike
- Gravity FSX 1.0 Dual Full Suspension Mountain Bike
- Schwinn Protocol 1.0 Dual-Suspension Mountain Bike
- Montague Paratrooper Folding Mountain Bike
- Vilano 26″ Mountain Bike
Best Enduro Mountain Bikes Reviews
The dual suspension design of the bike smooths the bumps while biking and also enhances the control for fluid riding. It features fitted Shimano 21-speed derailleurs and shifters for a more reliable and smooth gear shifting. Its linear-pull brakes offer enhanced stopping power and this is designed to be the complete economical and entry-level mountain bike. It satisfied all the basic riding needs of bikers and can hold a load capacity of up to 330 pounds. The product has a one-year warranty as well.
Experience a softer ride that absorbs impact efficiently with ease from both the ends and with rear and front suspensions. This results in a less disruptive bounce while riding on tough terrains and promotes a consistent contact between the ground and the wheels while turning hard at the corners. Its 21 rapid-fire derailleurs and shifters allow the user to power down the hills and to glide on flat surfaces comfortably.This is the high quality, affordable and entry-level 24-speed dual suspension bike and is one of the best sellers in the enduro bike segment. The bike features both front and rear disc brakes, an advanced aluminum frame with single pivot technology and an adjustable rear coil-over the cartridge shock. It also features a Shimano drivetrain and an adjusting front shock system.
The bike features disc brakes at both the front and the rear along with durable and strong aluminum frames. The bike has easy to use Shimano shifters. Its adjusting suspension at the front and the at the rear helps in hassle-free downhill riding. It features strong and light double-wall rims, and quick release wheels both at the front and at the rear. The bike is available in different colors to match the unique taste of its riders.This Enduro bike features an aluminum dual-suspension frame. It is lightweight and will absorb the bumps and ruts that one would encounter on the trail. It’s front fork absorbs all the shocks at the front allowing the arms and shoulders to rest at ease. There are totally 24 speeds with its Shimano EZ fire shifters and the Altus rear derailleur. This speed will allow the rider to climb the steepest hills with absolutely smooth shifting.
It’s front disc brake and the rear alloy linear-pull brake will help the user to stop in any trail condition. The three-piece cranks along with the double-wall alloy rims are light and strong. This is the ultimate quality bike that is built for the biker who wants to get on the mountain at ease. It’s front disc brake and the rear alloy brake combine for a crisp and all condition stopping experience.This is a brand new authentic bike with a valid warranty. The bike is shipped in a standard and a durable box and requires assembling at a local bike shop. This is the original folding mountain bike from Montague Paratrooper. It offers 24 speeds, mechanical disc brakes, front suspension and a rack stand for hauling gear. The bike is known for its durability and load-bearing capability. There is a one-year warranty on the parts as well.
It is available at a Matte Cammy green color with aluminum frame and direct connect system. It also features a replaceable derailleur hanger and disc mount. Its tires are from Kenda kinetics and the rims are of 26” alloy. The spokes are 14-gauge stainless steel. The bike also features a rack stand rear rack with fenders.
This is a double-butted 26” aluminum mountain bike with suspension fork and lockout. It features mechanical disc brakes for the maximum stopping power and alloy mag wheels. It also features Shimano 21 speed drivetrain for optimal riding performance.
The mag wheels of the Vilna Ridge look exceptionally great and its all-purpose tires will cover every terrain from street to trail. This is an impressive entry-level mountain bike that not just looks great but also performs exceptionally well. It is the best riding choice for campus and for work. It is possible to adjust its seats, changes gear efficiently and have all efficiently of an ideal mountain bike.
Buyer’s Guide for The Best Enduro Mountain Bikes
What to look for in the best Enduro Mountain Bikes?
A complete suspension enduro mountain bike is optimized for smashing downhill and is pretty strong enough to deal with some serious abuse as well. They are also pretty light and efficient to pedal to the top of the mountain as well. The mountain bike should possess some traits to allow its user to ride anywhere and literally over anything. The endure also features a lively and accessible racing scene. Here are some of the basic things to look for in the endure bike before choosing to buy it.
- Frame Material
- Frame Geometry
- Bike suspension
When it comes to frame material, there is a choice between Aluminum and Carbon. Carbon is indeed stiffer, lighter and stronger owing to its construction process. It can be molded into much better shape and each of its frames are consistent. An MTB with carbon frame can be pretty expensive owing to the high production cost. But the money spent is worth it as a stiff frame results in a more responsive ride, reacting to fast pedaling and direction changes.
The next frame material of choice is hydroformed aluminum, this is ideal for those riders who find the feel of carbon too stiff and unforgiving. Aluminum renders some flex and great comfort, especially at high speeds and while dealing with high impacts.
Steel is also used occasionally for the frames of enduring bikes. Steel has better vibration damping property than aluminum and is thus more durable and heavier. The best material of choice is titanium but it is pretty expensive than carbon. For the average rider, the best choice is between carbon and aluminum.
Frame geometry is better than frame material. This refers to the measurements and angles that comes to use in the design of the frame. Majority of the modern endure frames are low, long and slack. A long wheelbase gets the bike more stable at speed and refers to the measurement between the two wheels. Low refers to the height of the bottom bracket. If it is near to the ground, it helps to keep the center of gravity low. It helps the user to push through technical terrain as well.
Slack refers to the angle of the head tube, which influences the angle at which the suspension fork extends from the frame. The angle of the seat tube influences the seated weight in relation to the bottom bracket. A steeper seat angle helps with climbing and is irrelevant while going downhill.
All endure mountain bikes feature-complete suspension. This system helps the user to ride fast by ruling out bumps on the trail. The suspension takes the sting out of big impacts and offers more traction at the corners. The endure MTB bikes have a suspension between 140 mm and 170 mm of rear-wheel travel along with a suspension fork of equal or greater travel.
Having great rear travel can cause the bike to feel unresponsive while climbing. This in fact depends on the geometry and how the suspension deals with impact in the first place. There is no single design of full suspension frame, and how the parts move in relation with each other varies resulting in either progressive or linear suspension.
It is not just the frame design that influences the suspension feel but also the shock. Air shock ramps up more towards the end of the travel, whereas coil shocks are supple and linear.
Apart from keeping the bike rolling, wheels can have an excellent effect on the handling of the bike. The biker has to decide in the first place if they wish to have a bike with 27.5 inch or 29-inch wheels. Though there is a lot of discussion about the optimum size of the wheel, the general rule is that bigger wheels roll over the bumps easier. Tall riders will find that the 29-inch wheel fits the biker better.
After settling on the wheel size, the next important parameter to look for is the material that makes up the wheels. Carbon wheels are strong, light, stiff and expensive. But a good set of carbon wheels will help the rider to accelerate fast and hold their line through rough terrains. This rigidity can be a disadvantage on long descents as there is little vibration damping. A big impact can result in the cracking of the carbon rim. Those who pay extra for carbon wheels should also consider choosing a lifetime guarantee with the wheels, to be on the safer side.
Aluminum wheels, on the other hand, have more flex and render a comfortable ride. They are also more likely to dent rather than to crack if the user hits them hard. It is important to pay attention to the width of the rims, especially to the internal width. A wider internal measurement allows the tire to have a bigger volume rendering more traction. It is also important to check the hubs, before narrowing down on a single endure mountain bike.
The latest standard gear set up with enduring bikes is 11×1 or 12×1 set up. The former will offer the range of gears that the user would require to ride in the majority of the terrains. 12×1 is required only for fast and strong riders and for those who will spend a lot of time on steep climbs.
Greater the power of the brakes, faster is the ride on the trails. This also offers the assurance that the brakes can slow down the user every time they go on dangerous speeds over fast descents. Choose a bike with four pistons and rotors and those that are not less than 180 mm in diameter. Bigger rotors render more stopping power. Different bike brakes have different levels of adjust-ability when it comes to pad contact point and lever reach. Each of the bike’s brakes performs differently when they are under pressure. It is worth to have a close look at the brakes that comes as a stock on the bike, and also learn when and why they require an up-gradation.
FAQ’s About Enduro Mountain Bikes
What is meant by an Enduro bike?
Enduro is a style of riding and racing mountain bikes with a tremendous emphasis on the downhill riding. These bikes are easy to pedal to the top of the mountain but are not that easy as a cross country bike. They literally shine on fast and technical terrain and usually have a front and rear suspension. Their big tires render tremendous traction and a lot of attitudes.
Is it advisable to buy the most expensive endure bike with the best components?
It is true that the high end and the most expensive components are more accurate than their cheaper counterparts. But the use of lighter materials means that its parts can wear out faster. Low-end components also get the job done confidently. Certain components such as the derailleurs, chains, and the cassettes will all require replacements sooner or later. So those who have lots of spare cash can go for high end and light endures bikes.
Is it worth to spend on expensive carbon framed bikes?
Keeping aside the feel and the ride, the one important point to bear in mind while choosing between carbon and aluminum is that carbon cannot be recycled and lots of it ends up in ocean fill. This is less ideal for the planet. Aluminum can get recycled completely and the final choice is a matter of personal preference.
Enduro bikes are predominantly meant for racing. But are they still fun to ride around?
Most of the endure bikes are sold to average weekend bikes who want the best mountain bike to smash around the local trails. Even for those who have never considered entering a race, the new endure bike will obviously be fun to ride.
The endure bikes have evolved tremendously over a short span of time. The best of the new designs are lightweight, has the best performance and have made long travel much better than before. We hope this guide was helpful in finding the best endure bikes to fit your needs. We have also made the search easier for you by listing the top five best endure bikes for this year.